heat exchange tube

英 [hiːt ɪksˈtʃeɪndʒ tjuːb] 美 [hiːt ɪksˈtʃeɪndʒ tuːb]

网络  换热管

化学



双语例句

  1. Fixed tube sheet type heat exchanger The Active Connection Technology about Heat Exchange Tube and Tube-sheet
    固定管板式热交换器管壳式换热器中换热管与管板的活性连接技术
  2. Enhancement of Heat Transfer Performance by the Way to Insert the Plastic Twisted-tape into Heat Exchange Tube
    换热管内置塑料扭带强化传热性能的研究
  3. At present, several production lines of liquid control, heat exchange and high-tech tube and pipe etc* have been accomplished and achieved mass production.
    目前,已建成流体控制、热交换及高新管材等多条生产线并实现量产。
  4. Each heat exchange tube has a plurality of flow channels defining discrete flow paths extending longitudinally in parallel relationship from its inlet end to its outlet end.
    每个热交换管具有限定出分立的流动通路的多个流动通道,这些通路以平行关系沿纵向从其入口端延伸到其出口端。
  5. It is hard to make an analysis of the temperature field and stress field in the tube sheet and cylinder of a waster heat boiler owing to asymmetric arrangement of the heat exchange tube.
    废热锅炉换热管分布的不对称性,使得管板和筒体等部件的温度场与应力场分析十分困难。
  6. A New Optimal Method of Processing Experimental Data for Enhanced Heat Exchange Tube
    强化传热管实验数据处理优化方法
  7. Dynamic Stress Measurment for Heat exchange tube Under Medium Temperature High Pressure Flushing and Strong Corrosion Environment
    换热管在中温高压强冲刷强腐蚀下的动态应力测试
  8. The Failure and Countermeasure of Heat Exchange Tube in Cumene Oxidation Tower DETERMINATION METHOD FOR DETERGENCY OF DIESEL ENGINE OIL ( HEAT TUBE OXIDATION METHOD)
    异丙苯氧化塔内换热管的失效与对策柴油机油清净性测定法(热管氧化法)
  9. Reasons for heat exchange tube explosion of primary waste heat boiler
    第一废热锅炉换热管爆裂原因分析及对策
  10. The processes are similar in experimental data of enhanced heat exchange tube research and the processing of experimental data is very tedious.
    恒壁温条件的强化传热管实验研究的数据处理过程具有相似性,实验测量数据的处理比较繁琐。
  11. Under the experimental scope, the heat exchange ability of tube with cross inside S-like fin was stronger than that of tube with single inside S-like fin.
    在实验范围内,交叉S管的换热能力要好于单S管。
  12. Investigation of rotary rolling and the mechanical performance of the threading grove heat exchange tube
    螺纹槽换热管的滚轧加工及力学性能的研究
  13. Cleaning Heat Exchange Tube of Boiler being an Effective Approach to Promoting Thermal Efficiency of Boiler
    清洗锅炉换热管壁是提高热效率的有效途径
  14. On-line Determination of Cumene Hydroperoxide Concentration in Cumene Oxidation Products by Liquid Ultrasonic Velocimeter The Failure and Countermeasure of Heat Exchange Tube in Cumene Oxidation Tower
    超声波液体声速仪在线测定异丙苯氧化液中过氧化氢异丙苯的浓度异丙苯氧化塔内换热管的失效与对策
  15. This article has described the structure design of the floating chuck and its application status in the heat exchange tube sheet machining.
    介绍了在加工换热器管板时采用的平移式浮动夹头的结构设计及应用情况。
  16. Holing failure analysis of a heat exchange tube wall on the heater of an oil-tanker
    油船加热器换热管壁穿孔的失效分析
  17. To resolve problem of lower heat exchange of tube type indirect evaporative cooling air conditioning, theoretical analyses and test research of enhancing heat exchange were done according to existing problem in operation.
    为了解决目前管式间接蒸发冷却器换热效率较低的问题,针对管式间接蒸发冷却器工作运行中存在的问题,就如何提高其换热性能进行了理论分析和试验研究。
  18. Leakage Reason Analysis for Heat Exchange Tube of Oil Cooler
    油冷却器换热管泄漏原因分析
  19. Synthetical evaluation of material performance of heat exchange tube for waste heat boiler
    废热锅炉换热管材料性能综合评定
  20. The main equipments of GCP including bag dust removal system, dust collecting and conveying system, heat exchange system, tube valve system and controlling system.
    高炉煤气全干法除尘设施由五大部分组成,包括布袋除尘系统、集灰输灰系统、冷热交换系统、管路阀门系统和控制系统。
  21. Based on the Study on the Safety assessment and surplus life computation of heat exchange tube, this paper presents a study method for the safety assessment and surplus life computation of heat exchange tube, and develops a mathematical model and computation method for it
    通过对高压甲铵冷凝器换热管的安全评定及剩余寿命的研究,提出了对换热管进行安全评定和剩余寿命的研究方法和判定安全性及计算剩余寿命所必需的数学模型和计算方法
  22. Study on the Safety Assessment and surplus Life Computation for Heat Exchange Tube
    换热管安全评定及剩余寿命的研究
  23. Trend to Use Stainless Steel for the Heat Exchange Tube of Condenser and LP Heater
    凝汽器和低压加热器换热管采用不锈钢材质的趋势
  24. Cause Analysis on Cracking of Heat Exchange Tube for Outlet Cooler of Catalytic Gas Compressor
    催化气压机出口冷却器换热管开裂原因分析
  25. Obtained Influencing Factors of heat exchange efficiency in air cooler such as cooling load 、 diameter of heat exchange tube and fluid velocity, by using the method of analysis of thermal efficiency. This provided design reference of energy-saving and high efficient for structure design of air cooler.
    同时,采用热效率分析法,得出冷负荷、换热管管径、冷热流体流速等因素对空冷器换热效率的影响,这对空冷器结构高效、节能的设计提出了新的参考。
  26. In order to deeply understand whether flue gas would directly scour the heat exchange tube, and verify whether shunt can meet the design requirement.
    为研究进入辐射室的高温烟气是否会直接冲刷换热管,验证烟气分流器是否达到设计要求。
  27. The experiment, which water is the medium, is a single-tube cold model. Observe the condition of uniform membrane around the wall of heat exchange tube and analyzing the variation of unwell-distributed coefficient under different spray density.
    以水为介质进行了单管冷模实验,观察在不同的喷淋密度下换热管内壁的成膜情况,分析了在不同喷淋密度下成膜不均匀度的变化规律。
  28. During the late exponential asym-ptotic growth characteristics reflect the fouling layer forming process. To the new heat exchange tube, first fouling growth is the basic form, and it is difficult to remove the adhesive layer formation.
    对于新换热管而言,污垢的生长首先是基层的形成,然后是难以清除的附着层的形成;对于除污后的换热管,污垢再次生长过程主要是附着层的形成。
  29. Additionally, through and traditional heat exchange tube heat transfer and resistance performance comparison shows, two new types of the pipe thermal improve is 4.8 per 1,000,17.6 per 1,000; The average drag coefficient reducing 6.74%, 4.94%.
    另外,通过与传统换热管传热与阻力性能的对比可见,两种新型传热管换热效率分别提高4.8‰、17.6‰;平均阻力系数降低6.74%、4.94%。